Details for D/P LiquiSeal Purge Control

• 4-20 mA Output for Broad Compatibility
• Better than ±0.02% Span Repeatability
• Piezoresistive Technology for Enhanced Stability

D/P transmitters accept either gage or differential pressure pneumatic inputs that are converted to a proportional 4-20 mA output signal. This two wire signal loop is compatible with typical process components that accept analog input including PLCs. KING-GAGE^® D/P Transmitters are also offered in hybrid versions combined with an air flow control for pneumatic sensors or downpipe (bubbler) systems. These units allow for direct 4-20 mA output from the tank with power provided by the receiver.

LiquiSeal D/P purge control is a fully integrated air purge regulator and level transmitter. Operation is based on the control regulating a continuous 1 cfh (cubic foot per hour) flow of compressed air into the tank downpipe. An internal differential pressure sensor element converts resulting pressure into a 4-20 mAdc two wire signal.

For a pdf of the D/P LiquiSeal Data Sheet, click the 'Download' button below.