|
|
Documents
• 4-20 mA Output for Broad Compatibility
• Better than ±0.02% Span Repeatability
• Piezoresistive Technology for Enhanced Stability
Liquid level gauging demands a high degree of accuracy and repeatability. This is especially true for quality control in batch processing operations. That is why KING-GAGE ® D/P Transmitters are specifically designed to provide optimal performance in tank gauging applications. They utilize a precision piezoresistive sensor element that provides excellent long term stability. Guaranteed accuracy is within ± 0.2% F.S. and repeatable to within ± 0.02% of calibrated span.
Â
For a pdf of the D/P Transmitter Data Sheet, click the 'Download' button below.
• 4-20 mA Output for Broad Compatibility
• Better than ±0.02% Span Repeatability
• Piezoresistive Technology for Enhanced Stability
D/P transmitters accept either gage or differential pressure pneumatic inputs that are converted to a proportional 4-20 mA output signal. This two wire signal loop is compatible with typical process components that accept analog input including PLCs. KING-GAGE® D/P Transmitters are also offered in hybrid versions combined with an air flow control for pneumatic sensors or downpipe (bubbler) systems. These units allow for direct 4-20 mA output from the tank with power provided by the receiver.
For a pdf of the D/P Sensor Data Sheet, click the 'Download' button below.
• 4-20 mA Output for Broad Compatibility
• Better than ±0.02% Span Repeatability
• Piezoresistive Technology for Enhanced Stability
D/P transmitters accept either gage or differential pressure pneumatic inputs that are converted to a proportional 4-20 mA output signal. This two wire signal loop is compatible with typical process components that accept analog input including PLCs. KING-GAGE® D/P Transmitters are also offered in hybrid versions combined with an air flow control for pneumatic sensors or downpipe (bubbler) systems. These units allow for direct 4-20 mA output from the tank with power provided by the receiver.
788 D/P Purge Control is a more basic differential pressure regulator and air flow control. It generates a constant flow of compressed air to purge a downpipe. Its integral differential pressure transmitter provides 4-20 mAdc output proportional to liquid level.
For a pdf of the D/P Purge Control Data Sheet, click the 'Download' button below.
• 4-20 mA Output for Broad Compatibility
• Better than ±0.02% Span Repeatability
• Piezoresistive Technology for Enhanced Stability
D/P transmitters accept either gage or differential pressure pneumatic inputs that are converted to a proportional 4-20 mA output signal. This two wire signal loop is compatible with typical process components that accept analog input including PLCs. KING-GAGE® D/P Transmitters are also offered in hybrid versions combined with an air flow control for pneumatic sensors or downpipe (bubbler) systems. These units allow for direct 4-20 mA output from the tank with power provided by the receiver.
LiquiSeal D/P purge control is a fully integrated air purge regulator and level transmitter. Operation is based on the control regulating a continuous 1 cfh (cubic foot per hour) flow of compressed air into the tank downpipe. An internal differential pressure sensor element converts resulting pressure into a 4-20 mAdc two wire signal.
For a pdf of the D/P LiquiSeal Data Sheet, click the 'Download' button below.
• 4-20 mA Output for Broad Compatibility
• Better than ±0.02% Span Repeatability
• Piezoresistive Technology for Enhanced Stability
Liquid level gauging demands a high degree of accuracy and repeatability. This is especially true for quality control in batch processing operations. That is why KING-GAGE® D/P Transmitters are specifically designed to provide optimal performance in tank gauging applications. They utilize a precision piezoresistive sensor element that provides excellent long term stability. Guaranteed accuracy is within ± 0.2% F.S. and repeatable to within ± 0.02% of calibrated span.
D/P transmitters accept either gage or differential pressure pneumatic inputs that are converted to a proportional 4-20 mA output signal. This two wire signal loop is compatible with typical process components that accept analog input including PLCs.
For a pdf of the D/P Module Data Sheet, click the 'Download' button below.
|
|
