LP2 Multiple Tank Display
LP2 Multiple Tank Indicator With Optional Set Point Controller
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
SERIES | 4641 | LP2 Multiple Tank Indicator With Optional Set Point Controller | ||||
ENCLOSURE OPTIONS | 2 | FRP enclosure, standard | 3 | 304 Stainless Steel | 4 | Flush mount (Multiple tank version only) |
CONFIGURATIONS * | 0 | Multiple tank | 1 | L/H SETPT1 low, SETPT2 high (Optional Set Point Controller version) |
2 | H/H SETPT1 high, SETPT2 high (Optional Set Point Controller version) |
NOTES: Engineered FRP and Stainless Steel enclosures listed are splash-proof and UL-listed. Intended to meet NEMA 4X. Includes Hubbell cable relief fittings (3), suitable for splash-tight installation.
* Must be ordered with Part Number 4223 iButton Datapack (application programming) Part Number 4223, see page 74 in the catalog for details.
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
SPECIFICATIONS
Power requirements | 100-240 Vac, 50-60 Hz, 25 watts (fused internally for 2.5 A 120/250 V) |
Temperature range (Environmental) |
30 °F to 120 °F (-1 °C to 49 °C) operating range |
Signal input | 4 mA to 20 mA (mAdc) |
Input channels | 8 input channels; two wire 4 mA to 20 mA analog signal |
Keypad | Membrane numeric keypad, five (5) function keys, positive tactile response |
Power output | 24 Vdc nominal; fused @ 0.5 Amp |
Input impedance (Resistance) |
120 ohm nominal (2.4 Vdc drop @ 20 mAdc) |
Memory | Nonvolatile 64kbit memory iButton |
Digital readout | Alphanumeric 0.3173 in. (8 mm)16-character x 2-line LCD; numeric 8-digit (0-99999999 maximum) |
Accuracy | ±0.048% Full scale (±0.024% Full scale, typical) |
Resolution | ±0.024% FS maximum (±0.004 mA) |
Communications | Two (2) serial EIA RS-485 ports; two wire multidrop |
Setpoint relays (SP version) |
Sixteen (16) independent user setpoints; two (2) setpoints per tank channel; SPDT (form-C) relays, maximum 3.0 A @ 115 Vac. Rated for minimum 100,000 cycle/life at rated load.; continuously adjustable over full input range. |
Status display panel (SP version) |
LED setpoint indicators for visual confirmation when individual SPDT relays are energized. |
Enclosures | LP2 Single & Multiple Tank Display: Engineered thermoplastic (NORYL) enclosure; UL 50, NEMA type 3, 3S, 4, 4X, 12; hinged cover with dual latching screws. Optional 14 gauge Stainless Steel enclosure; UL 50 type 4, 4X, 12, 13; hinged cover with dual latching screw lugs. LP2 SP Multiple Tank Indicator/Setpoint Controller: Fiberglass-reinforced polyester (FRP) enclosure; U.L. listed (U.L. 508) types 3, 3R, 3S, 4, 4X, and 12. Optional 304 Stainless Steel enclosure; overall maximum dimensions 5-1/2” H x 13” W x 6” D. |
4223-M iButton Datapack (Application programming )
* = Number of tanks
Installation
1 = Field installed kit
2 = Factory installed
Baud Rate:
7469-24-0 500 mA 250V GMA fast acting fuse 5 x 20 mm, processor board, 5-pack
7469-24-4 2.5 Amp 250V GMA fast acting fuse 5 x 20 mm, power supply, 5-pack
5858-2 2-terminal connector
5858-3 3-terminal socket connector
5858-12 12-terminal socket connector
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov