Filters

Home » Products » Filters » Desiccant Filter/Dryers » 1716 Series Metl-Guard/Visi-Guard Desiccant Dryer 12 SCFM, Without Sump

1716 Series Metl-Guard/Visi-Guard Desiccant Dryer 12 SCFM, Without Sump

  • These compressed air dryers are intended for instrumentation, laboratory applications and other low-flow uses that require extremely dry or oil-free air
  • Removes contaminants in vapor form, which cannot be removed by filtration
  • The type of application should be specified as to whether dew point reduction (water vapor) or the  removal of oil vapor is required

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

ORDERING INFORMATION

SERIES 1716 Visi-Guard & Metl-Guard Desiccant Dryer 12 SCFM
DRAIN TYPE 6 Metl-Guard, solid aluminum housing 10 Visi-Guard, aluminum/acrylic housing with shatter guard for desiccant visibility
EFFICIENCY 1 With SG-1 desiccant, water vapor (-50°F/-45°C dew point)  5 With MS-1 desiccant, water vapor (-100°F/-73°C dew point)
4 With AG-1 desiccant, oil vapor (≤ 0.5 ppm w/w)     

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

SPECIFICATIONS

Maximum pressure 150 psi
Rated flow 12 scfm @ 100 psig; 340 l/min @ 7 Kg/cm2; 20 m3/hr @ 7 bar
Connections 1/2" NPT
Filter type Desiccant bed
Housing Aluminum/Acrylic
Efficiency Water vapor (-50 °F/-45 °C dew point) with SG-1 desiccant,
Water vapor (-100 °F/-73 °C dew point) with MS-1 desiccant,
Oil vapor (≤ 0.5 ppm w/w) with AC-1 desiccant
Weight 15.0 lb/7 kg

WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov