If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
SERIES | 5600 | |||||
FITTINGS | 1 | None, ¼" NPT | 3 | Polyflo; 1/4" tube 1/4” tube X 1/4” NPT | 4 | Swagelok 1/4” tube 1/4” tube x 1/4 NPT (compatible with copper or poly tubing) |
PRESSURE RANGE | 0 | 0-5 psid / 0-0.3 bar | 2 | 0-15 psid / 0-1.03 bar | 4 | 0-50 psid / 0-3.44 bar |
1 | 0-10 psid / 0-0.69 bar | 3 | 0-30 psid / 0-2.06 bar | 5 | 0-2 psid / 0-0.14 bar |
NOTE: Not rated for explosion hazard areas, includes Hubbell nylon cord connector.
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
SPECIFICATIONS
Accuracy | 0-5 psid trans./control 0-10 psid trans./control 0-15 psid trans./control 0-30 psid trans./control 0-50 psid trans./control |
± 0.34% full scale ± 0.27% full scale ± 0.24% full scale ± 0.22% full scale ± 0.21% full scale |
Repeatability | ± 0.20% of calibrated span | |
Temperature Range | 0 °F to 120 °F / -16 °C to 54 °C | |
Maximum pressure | 300% over-range | |
Burst pressure | 200 psig | |
DP Purge control | Unit incorporates differential air flow regulator with flow control orifice Fixed differential set to nominal 10 psid Output is 1:1 pneumatic pressure (hydrostatic force equivalent) Includes an integral differential pressure (D/P) transmitter converting pneumatic pressure into 4 mAdc to 20 mAdc electronic output. Ranges available: 0 psid to 5 psid, 0 psid to 10 psid to 30 psid, 0 psid to 50 psid |
|
Flow rate (air purge) | Nominal 1 cfh (cubic feet per hour) at specified differential Maximum air consumption under 5 cfh. |
|
Materials | Machined brass body with acrylic semi-gloss enamel finish; integral filter element is aluminum with acrylic semi-gloss enamel finish | |
SafeGard option | An adjustable pressure-limiting control that permits pre-setting a maximum value for pressure output from the Purge Control. SafeGard range available as 25 inH2O to 650 inH2O or 650 inH2O to 1750 inH2O |
* Unregulated
Not environmentally sealed, place in protected location
5900-*-0 Milliamp output; 4-20 mAdc 0-5 psid range
5900-*-1 Milliamp output; 4-20 mAdc 0-10 psid range
5900-*-2 Milliamp output; 4-20 mAdc 0-15 psid range
5900-*-3 Milliamp output; 4-20 mAdc 0-30 psid range
5900-*-4 Milliamp output; 4-20 mAdc 0-50 psid range
* =
1 - None (1/8" NPT connection)
4 - Swagelok 1/4" tube x 1/8" NPT (compatible with Copper or Poly tubing
Last digit
0 = 0-5 psid / 0-0.3 bar
1 = 0-10 psid / 0-0.69 bar
2 = 0-15 psid / 0-1.03 bar
3 = 0-30 psid / 0-2.06 bar
4 = 0-50 psid / 0-3.44 bar
More details on 788 Series Differential Pressure Purge Control
Fully integrated air purge regulator that provides continuous level measurement
Integral differential pressure transmitter provides 4 mAdc to 20 mAdc output proportional to liquid level
Reliable proven sensing technique
A highly refined versions of the basic bubbler air control
All-pneumatic version available
Simple to install and maintain
More details on 738 Series Differential Pressure LiquiSeal Control
More details on 868 Series Differential Pressure Sensor Control
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov