Process Indicators

Home » Products » Process Indicators » Mechanical » 5880-1 Series Multi-Point Process Switch

5880-1 Series Multi-Point Process Switch

  • Used to control continuous process operations, provide Fail-safe limiting or alarm functions
  • 4 Adjustable set points
  • Controls simple process functions
  • Independent SPDT (Form C) relays
  • For process transmitters with 4 mA to 20 mA output

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

ORDERING INFORMATION

SERIES 5880-1 Multi-Point Process Switch

NOTE: Process switch is compatible with any 4 mA to 20 mA output device such as the Electronic Sensor or D/P Transmitter. Requires 115 Vac.

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

SPECIFICATIONS

Power requirements Nominal 115 Vac./60 Hz. (unregulated)
3.45 Watt/0.03 Amp – fused @ 0.1 Amp
Temperature range
(Environmental)
32° F to 158° F/0° C to 70° C – operating
(-40° F to 158° F/-40° C to 70° C – storage)
Input DC current: 4 mA to 20 mA
Current limiting (overload) 70 mAdc maximum; automatic trip/reset using PTC resistor
(positive temperature coefficient) circuit
Input Impedance 132 Ohm resistance (3 Vdc drop @ 20 mAdc)
Set points 4) four independent user set-points; continuously adjustable over full input range.
Front panel LED status indicator gives visual confirmation when set-point value has been exceeded.
Sensitivity (adjustment) Set-points can be adjusted to better than 0.05% FS/0. 008 mAdc
Repeatability Set-point settings are repeatable to better than 0.05% (long-term repeatability: better than 0.1% FS)
Deadband Single deadband potentiometer controls all four set-point settings.
Deadband adjustable from 1.0%-12.5% FS. (Factory preset to 1% FS.)
Output (4) independent SPDT (form-C) relays; maximum 3.0 Amp @ 115 Vac. or 24 Vdc (resistive).
Rated for 100,000 cycles/life at rated load.
Weight 22 oz./624 g

Options & Accessories

7469-21-0 500 mA 250V fast acting (AGC) fuse, 0.25 x 1.25 in., replacement 5-pack
5858-2 2-terminal socket connector
5858-3 3-terminal socket connector
5858-12 12-terminal socket connector

 

WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov