KING-GAGE, A NOSHOK Company’s COVID-19 Response

Level Transmitters

Home » Products » Level Transmitters » Mechanical » 92 Series TeleSensor Level Transmitter

92 Series TeleSensor Level Transmitter

  • External mounting at tank
  • Pneumatic output, or electronic (4 mA to 20 mA) output when paired with KING-GAGE 860 Series Sensor Control or 868 Series D/P Purge Control
  • Unaffected by foam or vapor
  • Safe for hazardous environments
  • Virtually free from long term drift, hysteresis and temperature sensitivity unlike strain measurements (including load cells) since mechanical deflection of the diaphragm is not directly measured
  • The compensating pneumatic balance pressure which effectively isolates the sensor is converted to a proportional 4 mAdc to 20 mAdc signal or can be directly output to a suitable gauge 

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

ORDERING INFORMATION

SERIES 92  
FLANGE SIZES* 2 2" Flange 3 3" Flange 4 4" Flange
FLANGE MATERIALS 71 316 Stainless Steel 91 PVC    
FITTINGS 1 None, 1/4" NPT 3 Polyflo;(4) 1/4" tube 4 Swagelok; (4) 1/4” tube (compatible with copper or poly tubing)

NOTES: 3-tube cable (15 ft./4.5 m) included with shipment.
* Flanges have a titanium diaphragm, silicone rubber diaphragm configuration available, consult factory.
   4" flange has a 8 bolt circle. 2" and 3" flanges have a 4 bolt circle.
   All flanges are 150 lb. ANSI.
   Special 3" 304 Stainless Steel brewery flange is available, consult factory.

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

SPECIFICATIONS

Sensitivity Better than .001 psi (± .02 inH2O/.508 mm water)
Repeatability Better than ± .002 psi (± .05 inH2O/ 1.27 mm water)
Primary accuracy ± .007 psi (± 0.2 inH2O /.508 mm water)
Temperature range 30 °F to 300 °F (0 °C to 149 °C)
Pressure range Sensor is a 1:1 pneumatic force balance diaphragm capable of repeating hydrostatic pressure as an equivalent pneumatic output. Functional pressure limit is 130 psi (or 3598 inches @ 1.00 specific gravity) determined by supply pressure (35–150 psi) less 20 psi.
Maximum depth measurement 1937 inH2O (49.0 m water)
Wetted materials FKM O-ring, Titanium diaphragm, commercially pure.
Optional diaphragm materials: Silicone rubber
Mounting flange options: 316L Stainless, PVC, brewery special flange
Air consumptions Total air consumption of sensor package (including sensor control) is less than 10 CFH or 0.16 scfm
Compressed air supply requirements 35 psig to 150 psig (2.4–10.3 bar); clean, dry air (or inert gas)

Options & Accessories

  • Better than ±0.02% span repeatability
  • Also offered in hybrid versions combines with an air flow control for pneumatic sensors or downpipe (bubbler) systems

More details on 860 Series Sensor Control

  • 4 mA to 20 mA output for broad compatibility
  • Better than ±0.02% span repeatability
  • Piezoresistive technology for enhanced stability
  • Also offered in hybrid versions combined with an air flow control for pneumatic sensors or downpipe (bubbler) systems

More details on 868 Series Differential Pressure Sensor Control

Use for interconnection between AcraSensor and Sensor Control

1766-15      Cable, 15 ft (4.5 m) total length, trimmed
8014-*         Cable quantity discount, minimum purchase 50 feet

* = Total length

Replacement D/P capsule (sensor/transmitter assembly) for Model 868 D/P Sensor Controls. Signal input connection is 1/4 NPT - part numbers below do not include fitting.

S-1565-1-5-1 D/P replacement capsule kit (0-2 psid)
S-1565-1-0-1 D/P replacement capsule kit (0-5 psid)
S-1565-1-1-1 D/P replacement capsule kit (0-10 psid)
S-1565-1-2-1 D/P replacement capsule kit (0-15 psid)
S-1565-1-3-1 D/P replacement capsule kit (0-30 psid)
S-1565-1-4-1  D/P replacement capsule kit (0-50 psid)
7333-10 Replacement filter element
7334-2 SafeGard service kit
7334-9 Air control section kit
7879-20 Vent generator
9316-4 O-ring for D/P top plate (868)

    
        
        
        
        

Replacement/Service Parts for new 922/923/924 Series or 5373/5374 Series TeleSensor

1747-30 O-ring (FKM); Internal TeleSensor
6448-12-5  Diaphragm (silicone rubber); 2-pack
7904-2 Titanium diaphragm assembly (w/ FKM o-ring)
7904-1 Titanium diaphragm assembly (w/ silicone o-ring)

 

Replacement/Service Parts for existing 403/404 Series or 422/423/424 Series TeleSensor diaphragm units

6438 PTFE gasket (external TeleSensor)
6438-11 PTFE gasket (internal TeleSensor)
6448-4 Transmitter diaphragm, Kel-F
6448-13 Transmitter diaphragm, 316 SS
6448-22 Transmitter diaphragm, Titanium
5051-204 Kel-F diaphragm capsule assembly 0 °F - 250 °F (internal TeleSensor)
5051-213 316 SS diaphragm capsule assembly 0 °F - 250 °F (internal TeleSensor)
5051-222 Titanium diaphragm capsule assembly 0 °F - 110 °F (internal TeleSensor)

WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov